Catalogue/Other/

Rent Tilta Nucleus Nano II

A compact wireless follow focus with a touchscreen hand wheel, five times the motor torque of the original Nano, and camera run/stop.

Production-ready

All equipment is carefully tested by our technicians before being handed off to you.

Nothing left behind

Time to wrap? Check items off in your Renter Dashboard and see exactly where everything goes.

24 hour review

A rental specialist will review your request and follow up within 24 hours.

Delivery made simple

Convenient delivery coordinated around your production.

Overview

The Tilta Nucleus Nano II is a wireless lens control system built for gimbals, handheld builds and compact cinema rigs. Its hand wheel carries a 1.6-inch circular touchscreen that shows focus, iris and zoom positions, A/B marks and camera settings at a glance, and its lens motor delivers roughly five times the torque of the original Nucleus Nano — enough to drive stiffer cine-style focus rings, not just light still lenses.

The motor clamps to standard 15 mm rods and engages any 0.8 MOD lens gear. It calibrates automatically to a cine lens’s hard stops or manually on focus-by-wire glass, and it can trigger record and adjust settings on supported Blackmagic, Sony and Canon bodies. It’s the right tool when a 1st AC needs to pull focus off-board, when an operator is flying a gimbal solo, or any time a manual follow focus can’t reach the lens.

1.6" touchscreen hand wheel

Live FIZ readout, A/B marks and camera settings

5× the original Nano’s torque

Drives stiffer cine focus rings without slipping

Camera run/stop

Roll and cut from the hand wheel on supported bodies

Up to 300 ft range

Pull focus off-board, away from the camera

System type
Wireless lens control (FIZ) · up to 4 motor channels
Hand unit display
1.6" circular touchscreen
Wireless
2.4 GHz · Bluetooth
Range
Up to approx. 300 ft / 91 m line of sight
Motor torque
Approx. 5× the original Nucleus Nano · auto-adjusting
Motor gear
0.8 MOD (cine standard)
Motor mounting
15 mm rod clamp
Motor power
External via USB-C input · USB-C output to daisy-chain a second motor
Hand wheel battery
Internal 1800 mAh (6.66 Wh) · USB-C PD charging · usable while charging
Calibration
Automatic to hard stops or manual for focus-by-wire lenses · A/B marks and soft stops
Camera control
Blackmagic Pocket 4K/6K series via Bluetooth · Run/Stop, ISO, shutter and iris on Sony FX3, a7S III, a7R V, ZV-E1 and Canon R7 via USB-C
Compatibility
Works with Tilta Nucleus ecosystem (including the Nucleus Nano I and Nucleus-M motors)

Both Nucleus Nanos give you wireless focus on a light rig. The Nano II adds a 1.6" touchscreen hand wheel, roughly five times the motor torque, up to four motor channels and camera run/stop — the one to choose for cine lenses, multi-axis FIZ or an off-board focus puller.

SpecificationTilta Nucleus Nano IITilta Nucleus Nano
Hand unit1.6" touchscreen with live FIZ readoutCompact knob-style wheel, no screen
Motor torqueApprox. 5× the original · auto-adjustingBaseline · suited to light still and mirrorless lenses
Motor channelsUp to 4 (focus, iris, zoom + 1)Single motor
Camera controlRun/Stop and settings on supported bodiesLens control only
Motor gear0.8 MOD0.8 MOD
Mounting15 mm rod clamp15 mm rod clamp
RangeUp to approx. 300 ft / 91 mUp to approx. 300 ft / 90 m
Motor powerUSB-C in and out · daisy-chain motorsExternal USB power
CalibrationAuto or manual · A/B marks on screenAuto or manual A/B limits

Best for

Choose the Tilta Nucleus Nano II for

  • Cine primes and zooms with stiffer, longer-throw focus rings
  • An off-board 1st AC pulling to marks from a wireless monitor
  • Focus, iris and zoom from one hand unit as the kit grows
  • Rolling and cutting from the hand wheel on gimbal and remote-head shots

Choose the Tilta Nucleus Nano for

  • Light still and mirrorless lenses on a gimbal or handheld rig
  • Simple single-axis focus pulls on a lean budget
  • Two-camera shoots that need a matching pair of focus kits
  • Operators who want a wheel and nothing else to manage
  • The motor has no internal battery. Power it from the rig’s V-mount through a regulated D-Tap to USB-C PD cable, and add a D-Tap splitter if the camera or monitor shares the same battery. Charge the hand wheel overnight — it can top up over USB-C during lunch while still in use.
  • Mount the motor on 15 mm rods and mesh the 0.8 MOD gear squarely with the lens ring: fully seated with no backlash, but not pressing so hard that it side-loads the barrel. Lenses without a geared ring need a seamless gear ring before the shoot.
  • Recalibrate after every lens change. Run auto calibration only on cine lenses with hard stops; use manual calibration on focus-by-wire or endlessly rotating still lenses.
  • Set A/B marks during rehearsal and use soft stops to limit wheel travel to the move, so a fast pull lands on the mark every take. Leave the TF/DF switch on TF with Tilta motors.
  • For an off-board focus puller, pair the kit with a wireless video monitor so the 1st AC can judge focus from a full-size image rather than the camera’s screen.
  • On a gimbal, balance the rig with the motor and cable already mounted, and dress the USB-C cable so it can’t drag on an axis. If response stutters on a crowded 2.4 GHz set, switch channels and keep a clear line of sight.

Recommended Add-ons

Curated gear that pairs perfectly with this rental.

SHAPE D-Tap to USB-C Cable

$10.00/day · $65.00/week
$8.00/day · $45.00/week

D-Tap Splitter Cable

$5.00/day · $20.00/week
$4.00/day · $16.00/week

SWIT V-Mount Battery Kit

$50.00/day · $150.00/week
$40.00/day · $125.00/week

SmallRig V-Mount Crab Plate

$4.00/day · $20.00/week
$3.00/day · $15.00/week

Hollyland Pyro 7" Wireless Transceiving Monitor

$100.00/day · $565.00/week

* Reduced add-on rates apply when rented with this item.

Questions about this rental?

Contact us — a rental specialist will help you plan the right kit for your shoot.

Contact us

Need help building a package? Talk to a specialist →